Elitech ILD-200 Advanced Refrigerant Leak Detector&WJL-6000 Halogen Tester HVAC
ILD-200 Advanced Refrigerant Leak Detector is designed exclusively to make the HVACR Technician's job easier, faster, safer and more efficient. We set out to develop the best refrigerant leak detector for HVACR. The ergonomic design fits naturally in your hand. The ruggedized construction stands up to abuse most other leak detectors can't handle. The Six-hour battery life lets you work all day before recharging. The sound and light alarm allow you to work the way you want to work.
Features Advanced Sensor Compared to traditional corona sensor, ILD-200 adopts the most advanced sensor: 10 Years' sensor life Strong anti-interference Wide range and sensitive reaction Detects all halogenated refrigerants Meets EN14624,SAE-162,SAE-2791 and SAE-2913 standards. Sensitivity Adjustable When the detection result is not stable, lower the sensitivity level to adapt to the environment. 3 Selectable Sensitivity Levels -High/Medium/Low Maximum sensitivity up to 0.14oz/yr Suitable for all detection scenario Smaller leak, higher sensitivity grade TFT Screen The first TFT / LCD infrared leak detector: Easy and clear readings Animated sensitivity indication Animated screen alarm indication Real-time battery allowance display Sensor faulty indicator Peak Function Pressing PEAK button to mark the maximum leakage value that is achieved during leakage detection. Alerts and Mute Visual and audible alerts: TFT LCD Display and buzzer More refrigerants, more rapidly beep,more higher alarm grade Mute&Earphone Function: With earphone port, suitable for detecting even in a noisy environment Lithium Battery for 6 Hours Battery: built-in rechargeable lithium battery 3.7V 3000mAh Working time: continuous 6 hours Charging time: 4 hours Flexible Probe Around 14-inch flexible probe Allows detection in difficult and hard-to-reach areas LED UV light Other Functions To find out the leakages accurately, the detector is also provided with: Preheating time: 30s Reset time: 2s Response time: 3s Reset Function: Reset to max. sensitivity in clean air Reset to current sensitivity in refrigerants environment to detect higher concentration leakages
Product Details
Package included 1 x Leak Detector 1 x User Manual 1 x Packet of Filters 1 x USB Cable 1 x UV light
Specification
Sensor principle: spectrum absorption Sensor life: 10 years Alarm mode: sound and light alarm, TFT LCD display Automatic shutdown: 10 minutes without operation Weight: 2.8 lb Size: 7.9*3.3*1.5 inches Operating temperature: -10°C to 52°C (14°F to 125.6 °F) Operating relative humidity: 50%~85%RH Storage temperature: -20°C to 60°C (-4°F to 140 °F) 10 minutes auto off
Featuring with a corona sensor and advanced leak detect technology, WJL-6000 is our reliable product with the functions of easy operation, stable function and great performance; It’s an ideal and economic freon and halogen leak detector. It is widely applied on pipe leakage, automobile air conditioner, cold storage, refrigerator repair and so on.
Features:
Traditional Corona Sensor
It will respond to all halogenated. This includes, but is not limited to: CFCs e.g.R12, R11, R500, R503 etc. HCFCs e.g. R123, R124,R502 etc. HFCs e.g. R134a, R404s, R125, R1234yf etc. Blends such as AZ-50. HP62. MP39 etc.
Short Preheating Time Once the switch rotated, the detector will be ready to use. Preheating time: 6s Response time: 3s
Notice: Wait for 6 seconds away from the potential leakage area once the leak detector is switched on for more accurate detection or it may not give right alarm when you try to detect.
7 Adjustable Sensitivity 1-7 Grade selectable sensitivity Maximum sensitivity is 0.21oz/yr smaller leak, higher sensitivity grade More refrigerants, more rapidly beeps, faster indicator flashes Note: 2 beeps per second when the detector is open, 10 beeps per second when leak is detected)
Features
Audible and Visual Alerts LED light flash alarm Buzzer alarm Dual-battery indicators
Green-the battery voltage is normal, suitable for the job.
Orange-the battery voltage is close to the limit work, need to be replaced asap.
Flexible Probe Around 7.87-inch flexible probe Allows detection in difficult and hard-to-reach areas.
4AAA Batteries Battery life: about 50 hours
Leak Detector equips with: Compact design Portable black bag to carry and storage Note: batteries NOT included
Technical Parameters WJL-6000 CLD-100 HLD-100+ HLD-200 LD-200 ILD-200 Sensor Type Corona Corona Corona Corona Heated Diode Advanced Battery included NO NO NO NO YES YES Battery Required 4 AAA 4 AAA 2 C 2 AA Li-1800mA/h Li-3000mA/h Sensor Life ≥ 24 hours ≥ 24 hours ≥ 24 hours ≥ 24 hours ≥ 500 hours ≥ 10 years Probe Length 7.87 inch 7.87 inch 13.98 inch 12.01 inch 14.37 inch 14.37 inch Rechargeable NO NO NO NO YES YES Sensing Tip 1 1 2 2 1 1 Shipping
We will ship all items within 3 working days once payment finished,
We always ship items by USPS First Class, FedEx is the Expedited Shipping choice.
Sometimes international's delivery is highly dependent on the courier company and local customs/duties.
Import duties and taxes are not included in the item price or shipping charges. These charges are the buyer responsibility. About us
How we got our start?
Elitech initiated in the HVAC field in 1996 as a global manufacturer. With our R&D center located in Silicon Valley, CA, Elitech has established subsidiaries all over the world.
What makes our product unique?
With over 26 years of HVAC products manufacturing experience, Elitech produces a complete line of HVAC tools, with additional refrigeration solutions, Elitech leads the new generation of smart HVAC tools.
Why we love what we do?
Our mission is to combine intelligence and innovation with the refrigeration industry and make all work easier.
Returns Accepted for this item if it's within 30 Days